What we design — and what each material changes
Most buyers arrive with an idea and a reference image, not a material. That choice is usually the single biggest cost decision in the whole project, so it is worth making deliberately. These are the four families we build in, and what each one commits you to:
- Plush & soft toys — sewn and stuffed, with embroidered or appliquéd detail. Built from a sewing pattern rather than a steel mould, which is why soft goods are the easiest family to start small in. See plush toy design.
- PVC & vinyl figures — smooth, painted, collectible. Usually cast or injection moulded, then hand-finished and painted in several passes. See PVC and vinyl figure design.
- ABS & hard plastic — rigid, mechanical, often multi-part with moving joints and snap fits. Injection moulded, so part count and tolerances drive cost more than the look does. Also covered under hard-plastic toy design.
- Resin statues & collectibles — heavy, high-detail, low volume. Cast in silicone moulds with no steel tooling, which makes resin the natural fit for limited editions and display pieces. See resin collectible design.
| Family | What it is good at | Main tooling | Where the unit cost sits |
|---|---|---|---|
| Plush & soft | soft, huggable, forgiving of small design changes | sewing pattern + embroidery setup — no steel mould | fabric, filling, stitch count, accessories |
| PVC / vinyl | smooth painted surfaces, collectible shelf appeal | cast or injection mould | mould amortisation, paint passes, packaging |
| ABS / hard plastic | rigid structure, mechanisms, tight tolerances | injection mould, often several parts | mould cost, part count, assembly, precision |
| Resin | fine detail, heavy feel, small editions | silicone mould — no steel tooling | manual casting labour, finishing, base and box |
If you are unsure which family fits, the honest answer is that it depends on how the toy should feel in the hand, where it will be sold, and how many units you expect to run. We will tell you when a cheaper family would serve you just as well — that is the point of prototyping it in the prototyping stage rather than committing blind.
How a work moves from sketch to shelf
- Brief and references. A sketch, a moodboard, a competitor product or a rough description — plus the market you will sell into, because that sets the safety standard you have to meet.
- Design and 3D. Turnaround drawings, proportion passes and a specification sheet, so the shape is agreed on before anyone cuts anything.
- Pattern or engineering. For soft goods this is pattern making and embroidery placement; for hard goods it is mould-ready CAD with wall thicknesses and parting lines that can genuinely be tooled.
- Sample. We hand-build the sample in-house and revise it with you. A run of roughly 1 to 50 pieces is enough for launch photography, a pitch or a trade show — see how a plush goes from sketch to sample.
- Factory match and production. We shortlist factories across China against your spec and volume, quote at true cost, and stay on the project through pre-production approval. The sequence is set out in the sampling timeline.
What every piece in this gallery has in common
These are the things we insist on regardless of material, size or budget:
- A specification a factory can quote from without guessing. Dimensions, materials, colours, tolerances and packing — not just a picture.
- A physical sample approved before tooling is cut. Tooling is the least reversible spend in a toy project, so it is the last thing we commit to.
- Safety designed in from the start. Age grading, small-part rules, material restrictions and labelling all depend on your destination market — see the toy safety standards we build against.
- An IP check before you pay for tooling. Character, trademark and likeness problems are far cheaper to find on paper than in a shipment — see the licensing red lines.
- An honest view of the usual failure modes. We would rather point at the risks up front than discover them in your first production run — see the common custom toy failures.
Where the money actually goes
A toy is not priced by how it looks. It is priced by tooling, part count, materials, labour and volume. That is why a short run costs more per unit rather than the same amount scaled down — fixed costs are simply spread across fewer pieces. So we publish real ranges instead of hiding behind "contact us for pricing":
- What a toy prototype actually costs — and which line items you control.
- Why small batches cost more — what a minimum order quantity really covers.
- How long prototyping takes and why the clock is not the factory's fault.
- How to get a specification-backed quote — the inputs we need to give you a number instead of a guess.
Frequently asked
Do you only design toys, or do you also manufacture them?
We design, pattern and sample in-house, then match you to vetted factories across China for production. You approve a studio-built sample first, and you keep the factory relationship afterwards.
What materials can you work in?
Plush and soft toys, PVC and vinyl figures, ABS hard plastic parts, and cast resin collectibles and statues. The material family is usually decided by how the toy should feel, which market it sells into, and how many units you expect to run.
Can I start with one sample instead of a full production run?
Yes. We hand-build small sample batches of roughly 1 to 50 pieces without committing to steel tooling, which is enough for photography, a pitch deck or a trade show. Production volume is a separate decision you can make later.
Is there a minimum order quantity?
Pilot runs for custom plush typically start at 100 to 300 pieces, and real per-unit savings begin near 1,000. For pre-production we hand-build a sample batch of 1 to 50 pieces with no tooling commitment. For hard goods the minimum depends on the mould, so we quote it per project.
Do you handle safety testing and compliance?
We design against the standard for your destination market, so the sample you approve is already built for the tests it will face. We prepare the drawings and documentation factories and labs ask for. Formal certification is issued by accredited third-party laboratories, not by us.
How long does a project take?
Sampling usually runs a few weeks from the approved design, and production adds factory lead time on top. The total depends on how many revision rounds you need and whether new tooling is required, so we give you a dated plan rather than a vague estimate.